This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Specializing in helping companies achieve green initiatives and critical waste reduction goals such as Zero Landfill and ISO14001 certification, Closed Loop Recycling LLC. is an industrial launderer. They have developed a process to clean and reuse absorbent materials and to refine all non-hazardous fluids extracted from those absorbents. Closed Loop Recycling offers the largest line of reusable absorbents in the country.
Cobalt Aero Services is an FAA/EASA Repair Station focused on the repair and overhaul of Thrust Reversers, Nacelle Cowlings, Flight Control Panels and other Airframe Structures such as Fairings, Landing Gear Doors, etc. Cobalt's size and experienced technicians offer quick and nimble service to respond to our client's urgent requirements and Cobalt's leadership has the technical familiarity and depth of experience to handle difficult or unique repair scenarios. If you need a BER'd component made serviceable, or an AOG component repaired quick - turn to Cobalt for your solution.
Whatever cabin atmosphere, mood, or effect you crave, Cobalt Spectrum has it covered. From sunsets, sunrises, a northern lights show, or even just pure cool white, Cobalt Spectrum has the capacity to wow your customers and create that long-lasting impact that passengers desire.
Flying on hundreds of aircraft worldwide, Colbalt Spectrum is the simplest installation, offering the greatest payback and reliability.
Cobham is the provider of the high-performance and long-life Air Separation Module (ASM) for Boeing 737 Next Generation (NG) (NC1211) and Airbus A320 (NC1217) family of commercial airlines. Leveraging a pedigree of more than 35 years of expertise in military fuel tank inerting, Cobham is now set to helping airlines achieve cost savings thanks to superior technology and design.
Collins Aerospace, a unit of United Technologies Corp. (NYSE: UTX), is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Created in 2018 by bringing together UTC Aerospace Systems and Rockwell Collins, Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market.
Colonial Coatings provides over 200 years of combined experience in the coatings industry. We serve most prime aerospace contractors and the commercial sector as a trusted applicator for OEM parts and overhaul repair work. Our services include Magnesium anodize, surface sealants, paints (+ MIL spec), lubes, thermal plasma spray and sacrificial high-temperature coatings.
We are ITAR and NADCAP certified and an FAA/EASA repair station. We offer superior quality and better-than-industry-standard turn times.
Columbia Manufacturing is proud to supply critical assemblies, fabricated components and MRO services to the world’s major turbine engine manufacturers, commercial airlines, industrial power companies, military operations, and related industries. Columbia Manufacturing’s facility encompasses over 100,000 square feet with dedicated process areas for OEM and MRO services. We have many in-house processes such as CNC machining, welding, heat treating, brazing, FPI, and sheet metal forming.
Commercial Jet is an industry leading turn-key provider of aircraft maintenance, repair and overhaul (MRO) services for commercial and military aircraft. Commercial Jet specializes in line and heavy maintenance and modification services, aircraft painting, complete airframe inspections, freighter conversions, interior modifications, and avionics upgrade programs.
Component Control, a CAMP Systems Company, is a leading developer and provider of MRO and logistics software solutions for the aviation industry, supporting the core business of more than 1,600 companies in over 60 countries.
Component Control’s flagship software, Quantum Control, is the undisputed leader in providing advanced aviation management software and services to original equipment manufacturers, aftermarket service divisions, aircraft completion centers, MRO facilities, and part distribution/redistribution companies.
Concast is the largest manufacturer of continuous cast copper alloys in North America with two production facilities located in Mars, PA, and Wakeman, OH. Our primary focus is the production of copper alloys in bars, rods, tubes, and rectangles, as well as wrought drawn products. All products are produced with state-of-the-art horizontal and vertical continuous-casting technology. Aerospace alloys include; C510, C630, C642, C863, C865, C903, C905, C907, C927, C941, C943, C954, C955 and C95510-AMS4880.
Continental Aircraft Support: Component repair center with instrument class I, II, II, and IV and accessory class II and III. FAA, EASA, and ISO 9001:2008 certified operating out of our main 25,000 sq ft facility in Miami Lakes, Florida. Our extensive capability includes: Starters, Actuators, Generators, Fans, Motors, Pneumatic Accessories, and Electrical Components. Galley equipment capabilities include: Coffee Makers, Ovens, Boilers, Water Heaters, and Water Tanks. Our Instrument and Gyro Shop is comprehensive and supports a large number of cockpit instrumentations.
Coopesa RL: we are a FAA & EASA certified airframe MRO proud of our 55 years history of delivering: high quality workmanship, on time delivery, outstanding record of safety, and a focus on clients’ cost reduction. We specialize on the A-320FAM, B737series, Embraer-190 and B757 aircraft, serving the leading airlines in the Americas and global leasing companies. Based in Costa Rica, a free zone with the highest levels of education and stability in Central America.
Crane Aerospace & Electronics' aftermarket services and support team offers world-class support to airlines, military aircraft operators, and MROs. We provide OEM quality spare parts, repair services, and modification options for all of the components and systems provided by Crane A&E, as well as 24/7 field support services to help get aircraft back in the air.
Cross-Check Aviation has been a leader in the aviation industry for more than two decades. Certifying FAA/EASA instrument, accessory, and radio repair services for commercial and military requirements, we are dedicated to providing higher quality and efficiency and the best AOG results for aviation repair and overhaul.
CTG is the leading supplier of components and assemblies to many of the world's largest airlines, MROs and aircraft manufacturers. CTG stocks one of the largest on-site inventories of expendable and rotable parts for fixed-wing, rotorcraft, power plant & ground-support equipment, while maintaining a global network of MRO facilities and Supply Chain Partners.
Curtiss Wright (Product Support/Actuation Systems) is a leading provider of motion control components and integrated sub-systems for the military and commercial aerospace industry. As a major supplier to Boeing and Lockheed, products include; secondary flight control, weapons bay door drive, hoist and utility actuation systems and components. Component repair/overhaul capabilities are focused on, mechanical components, flap/slat actuators and flap carriages/tracks. Horizontal Stabilizer Trim Actuators are a core capability for all Boeing aircraft types.
The unique design characteristics of our Janitrol Aero cabin heaters result in safe, dependable and long-lived performance known throughout aviation.
This reputation began with our product line’s introduction during World War II and continues today. Our most successful application is the Boeing Chinook helicopter. Even though the Chinook is over 50 years old, our heaters are still providing reliable cabin heat for the crew and maximizing the performance of the aircraft.
C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in reserve power systems and electronic power supplies.
C W Price & Company was established in 1949 by (Tickey) C W Price originally serving the light aircraft industry with magneto and carburetor parts.
Over the years Barry Price (Tickey’s son) expanded the business mainly in the aviation field with ground support equipment such as, aircraft tow tractors and ground power units being added to our profile.
Meteorological equipment was also added to our supply base in the early 60’s.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.