This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Continental Aircraft Support offers a component repair center with instrument class I, II, II, and IV and accessory class II and III. We are FAA, EASA, and ISO 9001:2008 certified, operating out of our main 25,000 sq. ft. facility in Miami Lakes, Florida. Our extensive capabilities include starters, actuators, generators, fans, motors, pneumatic accessories, and electrical components. Galley equipment capabilities include coffee makers, ovens, boilers, water heaters, and water tanks. Our instrument and gyro shop is comprehensive and supports a large number of cockpit instrumentations.
Crane Aerospace & Electronics delivers mission-critical and innovative components, systems, and services for commercial aircraft, defense, and space markets. Products and services are organized into six integrated solutions: Cabin Systems, Electrical Power Solutions, Fluid Management, Landing Systems, Microwave Solutions, and Sensing Components & Systems. For more information, visit www.craneae.com.
At CTG (Crestwood Technology Group), we believe in a safe landing for every take-off, a secure transmission for every signal, a reliable return for every departure and a successfully completed mission. It’s why we do what we do. The systems that keep our families, neighborhoods and nation safe are only as dependable as the parts they’re made of. From parts to partnerships, we take pride in keeping fleets and systems operational, ready and safe.
Curtiss-Wright (Product Support/Actuation Systems) is a leading provider of motion control components and integrated sub-systems for the military and commercial aerospace industry. A major supplier to Boeing and Lockheed, our products include secondary flight control, weapons bay door drive, hoist and utility actuation systems, and components. Component repair/overhaul capabilities are focused on mechanical components, flap/slat actuators, and flap carriages/tracks. Horizontal Stabilizer Trim Actuators are a core capability for all Boeing aircraft types.
For more than 55 years our company has been providing expert aircraft refinishing services to the aviation industry. The experienced staff of more than 350 professionals, operating from four locations, provides a broad range of services, including: full strip and paint, flight control balancing, minor maintenance, and custom liveries for VIP, airline, and military customers.
Delta TechOps is the largest airline maintenance, repair and overhaul provider in North America. In addition to supplying maintenance and engineering support for Delta’s fleet of more than 850 aircraft, Delta TechOps serves more than 150 other aviation and airline customers around the world. The organization specializes in high-skill work such as engines, components, hangar and line maintenance. Delta TechOps employs more than 10,000 maintenance professionals and is one of the world’s most-experienced providers with more than 90 years of aviation experience.
For over 40 years, Derco, A Lockheed Martin Company, has provided full military logistics and technical support for fixed-wing aircraft. We offer an industry-leading suite of fleet management solutions, including spares distribution, logistics solutions, repair and overhaul services, and technical solutions. Derco supports global military efforts in over 65 countries and maintains one of the largest and diversified aircraft spares inventories in the world, including more than 75,000 parts in stock.
Desser Aerospace is your partner for global aviation distribution, MRO and DER repair services, and PMA product offerings. Founded as a rubber distribution business in 1920, Desser has since grown into an international partner for aircraft operators and FAA repair shops worldwide. The Desser Aerospace platform is comprised of industry leaders located globally:
Ducommun Incorporated is a leading engineering and manufacturing supplier of complex electronic systems, structural solutions, engineered products and aftermarket services for the global aerospace and defense industry. Founded in 1849, Ducommun is recognized as the oldest business in California. Today, the company supports commercial, military, and space platforms with broad capabilities and services that deliver value for our customers, including new product introductions, supply chain strategies, and program management.
Dymax Corporation specializes in the formulation, manufacture, and service of advanced assembly adhesives, conformal coatings, maskants, fluid delivery systems, and light-curing equipment. Dymax SpeedMask® maskants provide superior protection of turbine components, and PCB assemblies during surface treatment processes. The maskants contain no non-reactive solvents, 100% solids, and cure in seconds upon exposure to proper UV/Visible light energy, providing cost savings through reductions in labor, rework, and scrap.
Eastman is a global, advanced materials and specialty additives company that produces a broad range of products found in items people use every day. Its market-driven approaches take advantage of world-class technology platforms in attractive end markets such as building and construction, consumables, and transportation.
Over the last 50 years, EDMO’s commitment to providing the best service and most comprehensive selection possible has made it a company that customers count on and trust. Serving commercial, corporate, military, and general aviation customers in the fixed-wing and rotor markets, EDMO has secured a reputation as one of the most reliable sources for aircraft electronics, test equipment, installation supplies, wire and cable, tooling, and pilot supplies. EDMO does whatever it takes to deliver quality and excellence to its brands and customers.
Electro Enterprises is a leading global distributor of interconnect, electromechanical, wire/cable, and harness assembly products for the aerospace industry. We have unmatched inventory levels and access to more than 80 authorized lines from the industry’s leading manufactures. Our services include connector assembly, fiber optic cable assembly, kitting, marking, built to print, military packaging and labeling, and vendor managed inventory.
Electro is a HubZone certified, Woman-Owned Small Business implementing a third-party registered AS9100 Quality System.
We are passionate about what we do. The Embraer Services & Support team is formed by thousands of "Doers" around the globe and in multiple expertise. Every time and everywhere, from aircraft experts to mechanics, engineers, or contact center operators, we are available for every one of your needs.
Our top-ranked world-class services provide complete solutions and take care of the aircraft's entire lifecycle, with high-tech means and a very human touch.
We are a leading aerospace component supplier specializing in complex formed parts. We produce aircraft engine nacelles, bulkheads, heat shields, duct sections, and engine components. We also produce spacecraft components including thermal shields, structural components, and fuel system components. We support all metal forming, including hot stamping of Inconel®, stainless steel, aluminum, and titanium. We have an on-site foundry that allows us to support rapid developmental projects with prototype tooling and simulations, followed by full production tooling and components.
Engineered Precision Casting Company has been on the forefront of investment casting since 1946, producing high integrity, close tolerance parts for the military and aerospace industries. We are AS9100 certified and NADCAP approved for non-destructive testing, heat treating and welding.
EthosEnergy Accessories & Components provides comprehensive testing and overhaul services for aero engine fuel nozzles, injectors, harnesses, sensors, and engine components. Our component capabilities include, but are not limited to, the following engine models: PW100, PW2000, PW4000, V2500, CFM56, CF6, CF34, GE90, TPE331, JT8D-200, and RR Tay. Our FAA, EASA, CAAC, and AS9110 approved repair stations support the global aviation industry from three centers of excellence, located in Connecticut, South Carolina, and Scotland.
Evans Composites is a FAA Repair Station (E16R230X) providing repair and overhaul services to the commercial and military aerospace market. Core competencies include conventional sheet metal repair, honeycomb bond repair, and composite repair utilizing hot bond, oven, and autoclave processes.
Fatigue Technology (FTI) pioneered Cold Expansion Technology almost 50 years ago and has advanced this science with innovative solutions for bushing and fastener installations. FTI provides products that repair structural damage, return damaged fastener holes to nominal size, and partner with MROs for innovative repair solutions. FTI actively engages with Original Equipment Manufacturers to ensure tooling readiness for Service Bulletin maintenance.
First Aviation Services Inc. (FAvS), headquartered in Westport, Connecticut, is a leading provider of component repair and overhaul, PMA parts manufacturing and rotables management to the aviation industry worldwide. FAvS’s principal operating subsidiaries are: Aerospace Turbine Rotables, Inc. (AeTR) and Evōlution Aerospace, Inc. (EVO) in Wichita, KS; Piedmont Propulsion Systems, LLC (PPS) in Winston-Salem, NC; and Aviation Blade Services, Inc. (ABS) in Kissimmee, FL.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.