This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Three decades ago, the CRJ Series aircraft revolutionized the regional market. Unmatched in value and reliability, this successful program became the backbone of regional fleets worldwide, linking people and communities. With more than 1,300 aircraft flying, accumulating more than 50 million flight hours and safely transporting more than two billion people, the CRJ Series has the largest installed base of any regional aircraft in the world.
Cross-Check Aviation has been a leader in the aviation industry for more than two decades. Certifying FAA/EASA instrument, accessory, and radio repair services for commercial and military requirements, we are dedicated to providing higher quality and efficiency and the best AOG results for aviation repair and overhaul.
CTG is the leading supplier of components and assemblies to many of the world's largest airlines, MROs and aircraft manufacturers. CTG stocks one of the largest on-site inventories of expendable and rotable parts for fixed-wing, rotorcraft, power plant & ground-support equipment, while maintaining a global network of MRO facilities and Supply Chain Partners.
Curtiss-Wright (Product Support/Actuation Systems) is a leading provider of motion control components and integrated sub-systems for the military and commercial aerospace industry. A major supplier to Boeing and Lockheed, our products include secondary flight control, weapons bay door drive, hoist and utility actuation systems, and components. Component repair/overhaul capabilities are focused on mechanical components, flap/slat actuators, and flap carriages/tracks. Horizontal Stabilizer Trim Actuators are a core capability for all Boeing aircraft types.
DAES Group is a dedicated global aerospace service group that provides integrated support by offering full service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales support.
Our worldwide network of consultants and partnerships allow us to support different fields such as material management (CFM), component repair, ground support, and capital equipment.
All our solutions improve performance, reduce costs, and enhance workplace safety and environment care. Among them:
WHAT WE DO
DAS is an FAA Part 145 Repair Station focused on the repair overhaul of airframe, sheet metal, metal bonded and composite structures.
WHO WE SERVE
DAS has a diversified base of private, corporate and military customers. And with an employee team averaging 18 years of experience, DAS can support aggressive turn times and still maintain the highest quality with competitive prices.
We are the most recognized and respected name in the aircraft repair industry when it comes to 145 Repair Stations.
DaVinci Aerospace is a service disabled veteran-owned small business focusing on the defense market. We provide business development and program management services for companies looking to add capability with the government. We also provide engineering and DER services and repair and manufacturing. Our Part 145 Repair Station capabilities focus on both military and commercial parts that include structural (both composite and metal) and galley equipment. Our turning center focuses on bushings, sleeves, shims, and similar products.
DELTA H is a U.S. Air Force veteran- and family-owned and operated manufacturer of industrial heat treating furnaces and composite curing ovens designed exclusively for the aerospace and defense industries.
DELTA H provides confidence to your team's in-house heat treat operations by supplying turn-key systems that meet and exceed the strictest standards of AMS2750E and Nadcap accreditation requirements — along with a full week of start-up and training services.
Delta TechOps is the largest airline maintenance, repair and overhaul provider in North America. In addition to supplying maintenance and engineering support for Delta’s fleet of more than 850 aircraft, Delta TechOps serves more than 150 other aviation and airline customers around the world. The organization specializes in high-skill work such as engines, components, hangar and line maintenance. Delta TechOps employs more than 10,000 maintenance professionals and is one of the world’s most-experienced providers with more than 90 years of aviation experience.
Donecle provides a drone to automatically inspect aircraft during maintenance. Our technology combines a 100% automated drone (no pilot, no GPS) with image analysis algorithms to detect defects, lightning strikes, evaluate paint wear and check regulatory placards. We increase aircraft availability by reducing the length of inspections and provide data analysis solutions to optimize maintenance operations and costs while improving the safety of workers.
We offer a complete solution, from image collection to analysis and traceability, as well as training and maintenance.
Ducommun Incorporated is a leading engineering and manufacturing supplier of complex electronic systems, structural solutions, engineered products and aftermarket services for the global aerospace and defense industry. Founded in 1849, Ducommun is recognized as the oldest business in California. Today, the company supports commercial, military, and space platforms with broad capabilities and services that deliver value for our customers, including new product introductions, supply chain strategies, and program management.
Dymax Corporation specializes in the formulation, manufacture, and service of advanced assembly adhesives, coatings, masking resins, fluid delivery systems, and light-curing equipment. Dymax SpeedMask® masking resins provide superior protection of turbine components, orthopedic implants, and PWB assemblies during surface treatment operations. The maskants contain no non-reactive solvents and cure in seconds upon exposure to UV/Visible light energy, providing cost savings through reductions in labor, rework, and scrap.
Eastman is a global, advanced materials and specialty additives company that produces a broad range of products found in items people use every day. Its market-driven approaches take advantage of world-class technology platforms in attractive end markets such as building and construction, consumables, and transportation.
Elbit Systems of America is a leading provider of high performance products, system solutions, and support services focusing on the defense, homeland security, commercial aviation, and medical instrumentation markets. With facilities throughout the United States, Elbit Systems of America is dedicated to supporting those who contribute daily to the safety and security of the United States. Elbit Systems of America, LLC is wholly owned by Elbit Systems Ltd.
With almost 50 years of experience and more than 5600 active aircraft, Embraer knows every detail of what it does. It’s the only OEM in the world in commercial aviation, executive aviation, and defense. Embraer is able to offer support through a global service network for all types of technical and operational questions that our clients could have.
EthosEnergy Accessories & Components provides comprehensive testing and overhaul services for aero engine fuel nozzles, injectors, harnesses, sensors, and engine components. Our component capabilities include, but are not limited to, the following engine models: PW100, PW2000, PW4000, V2500, CFM56, CF6, CF34, GE90, TPE331, JT8D-200, and RR Tay. Our FAA, EASA, CAAC, and AS9110 approved repair stations support the global aviation industry from three centers of excellence, located in Connecticut, South Carolina, and Scotland.
Evans Composites is a FAA Repair Station (E16R230X) providing repair and overhaul services to the commercial and military aerospace market. Core competencies include conventional sheet metal repair, honeycomb bond repair, and composite repair utilizing hot bond, oven, and autoclave processes.
Based in Phoenix, Arizona, F&B Mfg, LLC, has been in the business of making parts and complex sheet metal assemblies for the aerospace, military, automotive, semi-conductor and commercial industries since 1923.
F&B's core expertise begins with being the best at hydroforming complex sheet metal shapes and then goes beyond, offering a full spectrum of metal forming value added capabilities. All of this at one location compliant to 4 Nadcap certifications!
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.