This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
The Fuel Cell is a dynamic and innovative support facility specializing in the repair & overhaul of aircraft fuel components.
Piece-Makers is an aviation tooling specialist, committed to helping the MRO industry expand capabilities with high quality aviation special tools, fixtures and equipment that conforms to all maintenance requirements as detailed in the ARINC Report 668,“Guidance for Tool and Test Equipment (TTE) Equivalency.”
Innodyne Systems was established in 2004 with an ambitious mission to serve regional and business aircraft customers with structural and electrical repair capabilities. Steady growth over the last 13+ years has come from using new approaches and technology to overcome barriers to field repair of a broad spectrum of components. While our expertise began with Bombardier Aerospace we have broadened support to include Embraer commercial and business aircraft as well.
Since 1986, Innovative Tooling Services has offered fastener installation and hole-preparation hand and power tooling solutions that create value and time savings in airframe maintenance and manufacturing.
We are pleased to be representing Numatx at the MRO show, the new ergonomic standard in compression riveting. Lightweight and powerful, Numatx has alligator and C-yoke riveters that are designed to install a variety of rivet materials and diameters. We also have the newest cordless riveter designed for seven different structural fasteners!
IAC has over 650,000 sq. ft. of climate-controlled paint hangars across 12 sites globally, utilizing the very latest in modern aircraft painting techniques and equipment. Dependent upon aircraft configuration, we can facilitate up to 36 aircraft lines and complete more than 1,000 aircraft painting events per year. Our global footprint now boasts 8 widebody hangars and we are nearing completion of a new widebody painting hangar in Shannon, Ireland.
ITT Aerospace Controls, Aftermarket Services (ITTAC/AS) is located in Valencia, California. This location houses the manufacturing and stocking facility that serves both our domestic and international customers. ITTAC/AS is focused on providing value-added services including PMA solutions that will promote high quality products in support of the aftermarket industry for both commercial and regional aerospace communities. ITTAC/AS products support fuel, hydraulic, environmental control systems, seat actuation and potable water systems.
With our long history in providing excellence in plastics design and development, manufacture and service, we’ve built enviable experience and lasting relationships with customers from industrial, commercial and R&D backgrounds in both local and global markets.
Working closely with our customers to overcome obstacles and provide seamless solutions, our team of highly skilled designers, plastic fabricators, engineers and project managers have the know-how and resources to create cost-effective, quality plastic parts for diverse applications and end-use environments.
Inca Gold comes backed with 35 years of experience and continual product refinements – ensuring our toilet chemicals and deodorants continue to deliver unsurpassed convenience and odor control to hundreds of bus companies, railroads, commercial airlines, boat charter companies, and RV parks across the United States and Internationally.
INCERTEC is among the largest NADCAP Accredited plating and metal finishing companies in America. We have approvals from many of the world's biggest names in the fields of aerospace, medical devices and electronics. Customers from these industries trust INCERTEC with their most demanding and important plating needs. Although gold plating, electroless nickel plating, copper plating, anodizing and fluorescent liquid penetrant (NDT) inspection are a few of our core specialties, we have the capabilities, internal expertise to tackle virtually any project.
Industrial Metals International, Limited (IML) is a full line stocking steel distributor, we specialize in the supply of Aerospace raw materials including Titanium, Aluminum, Alloy, Stainless Steel, Nickel, Bronze, and Plastics. Our extensive inventory of Bar, Sheet, Tube, Wire, Rings and Forgings allows us to offer material with no minimum order charge on stocked items.With our headquarters near JFK airport in New York, IML has the ability to ship your order immediately for next day deliveries.
Founded in 1935, by Dr. Harry Furlong as a service to local manufacturers supplying their steel wire and metal needs in Chicago. We have continued to supply steel wire since that time and have expanded our operations to allow us to offer our products and services across the United States.
Whatever your application needs, Innotec works to supply the "right" tape for that specialty application. No matter how large or small your requirements, we have the tape to fit your needs.
Recognizing the increasing need for diversified tape products, we are committed to the research and acquisition of the highest quality tapes to meet tomorrow's technological demands. In response, numerous industrial brand adhesive tapes are stocked, including the popular 3M brand.
Integrated Aviation Services provides cost-saving supply and maintenance solutions to commercial airlines, private operators and MRO stations around the region. Our products and services are designed to help our customers minimize their cost while maintaining the highest levels of quality, safety and service.Customers either looking for a single part, or a comprehensive supply chain management program, a long-term maintenance program, aircraft sales and leasing solutions, we could support those requirements.
Part of our success as a company comes from our ability to do it better than everyone else. Our business model was created while servicing one of the most critical and demanding industries in the world.
We bring manufacturing time to a few days, rather than a few weeks, without compromising quality or consistency, so our customers can have accurate results, quickly.
Operating as a fully owned and debt free corporation, IIT, Inc. strives to be a partner to each and every customer, not just another vendor.
IPG is a leading manufacture of high quality OEM approved tapes, Films and Textiles that consistently meet the demands of the aerospace industry. IPG has over 50 year of experience producing these products in the United States. We specialize in non-fly MRO as well as electrical and electronic tapes. Our MRO products are used in the process of applying and removing aerospace coatings from metal, plastic and composite materials in the commercial and military sectors as well as protecting valuable parts from corrosion and damage during storage and shipping.
ITW Polymers Adhesives, NA is a global leader in the development of Maintenance/Repair (MRO) solutions and OEM adhesives for the industrial market. Marketed under the Devcon® brand, these products are widely used in a number of industries including mining, coal-fired power, aggregate, pulp and paper and industrial OEM markets.
ITW Polymers Adhesives, North America is a world leader in the research, development and manufacture of structural adhesives and sealants as well as sprayable syntactic materials and coatings for industrials OEM assembly and maintenance/repair applications.
Marketed under the Devcon®, Plexus® and Spraycore® brands, these products are widely used in a number of markets including transportation, mining, coal-fired power, alternative energy (wind), marine, construction, electronics and general industrial.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.