This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Carolina GSE is a global supplier, distributor, repair facility, and service center of aircraft ground support equipment (GSE). We offer complete GSE solutions for new hangar start-ups, MROs, FBOs, military, and commercial airlines. Our expansive GSE portfolio includes a wide range of manufacturers including Tronair, Eagle Tugs, JetPorter Tugs, Malabar, DAE, Columbus Jacks, Unitron, Start Pac, Tiger Tugs, Dekal Load Banks, Jackson Weight Scales, Aero-Weigh Weight Scales, and much more.
8tree makes portable 3D surface inspection tools that deliver dent-mapping, blend-out, fastener-flushness and panel-alignment results within seconds. 8tree’s dentCHECK tool is approved by Airbus, backed by Boeing & Bombardier, and the choice of the world’s leading airlines/MROs for Line/Base maintenance and AOG tasks. It slashes damage-mapping & reporting times by 90%, delivers unmatched measurement accuracy and SRM-compliant ‘go/no-go’ answers.
Accudraft Paint Booths has been designing and building top-quality paint finishing systems for over 40 years. As a chosen vendor for the U.S. Air Force, Accudraft is proud of its rich history in aerospace refinishing. Accudraft manufactures innovative refinishing equipment for various industries, allowing for a vast experience in finding the precise solution for your operation. An in-house design and engineering team works with each customer to find a custom solution for their finishing needs at any budget.
AIRLINE SUPPORT GROUP (ASG) is an Engine Stand and Ground Support Equipment (GSE) Leasing and Sales Company, an Original Equipment Manufacturer (OEM), and a Supplier of Boeing, Airbus and Engine Tooling. ASG accommodates most AOG or short-term needs. ASG manufactures most commonly used engine stands, such as RB211-535, CFM56-3, CFM56-5, & CFM56-7, CF6-80C2, CF6-50C2, CF34-3 & CF34-8, V2500-A, TRENT 700 & TRENT 800, JT9D, GE90, PW4000, and PW4090-112”.
ASSA ABLOY Entrance Systems is the world’s most comprehensive supplier of automatic entrance solutions. Our Megadoor brand vertical-lifting fabric hangar doors are designed to meet any size or wind load and are the most energy-efficient hangar doors on the market. Megadoor hangar doors are constructed with solid, heavy-duty, corrosion-resistant components, and operate with a reliable electrical system and sealed motors to prevent dirt and dust infiltration.
Bascon Inc. is a nationally recognized architectural and engineering design and construction firm specializing in the aviation industry with over two decades of experience. Our professional staff of engineers, architects, and construction managers is committed to satisfying your operational requirements and would welcome the opportunity to serve your aviation facility needs.
BP Aero is a leading provider of engine disassembly and recently added storage, preservation and lease return services to our portfolio — CFM3/5/7, CF6-80, CF34-8, PW 4000, V2500 & RB211. BP Aero is an FAA/EASA/CAAC 145 Repair Station. BP Aero performs inspect, repair, and overhaul services on a range of CFM56/CF6-80/ CF34-8 & PW4000 components including Tubes, Manifolds, Cases, Housings, Supports, Disks, Seals, Shafts, LLPs, AGB, TGB, IGB, Heat Exchangers, Fuel Accessories, Pneumatic Starters and Lube Pumps. BP Aero is licensed by GE & P&W and Boeing.
At Burns & McDonnell, our engineers, architects, construction professionals and consultants do more than plan, design and build. With a mission unchanged since 1898 — make our clients successful — our more than 5,700 professionals located in over 40 offices worldwide partner with you on the toughest challenges to achieve aircraft maintenance excellence. In addition to design-build solutions, we offer hangar and maintenance facility master planning, determining your project’s place in the overall function of your business.
Champion GSE, an independent, family-owned company head- quartered in Springfield, Ohio, is a global leader in the design, development, testing and manufacturing of Stronghold engine stands, shipping and storage containers, as well as ground support equipment for general and commercial aviation, military, power generation and space programs. Champion GSE's customers rely on their vertically integrated manufacturing and comprehensive engineering capabilities, backed by more than 60 years in the industry.
Clayton is a design and manufacturing firm focused on dust collection solutions for commercial and military aerospace fabricators and maintainers. We work with leading aerospace firms to provide engineering controls which enhance worker safety and ensure compliance with OSHA and environmental regulations.
Cobham is the provider of the high-performance and long-life Air Separation Module (ASM) for Boeing 737 Next Generation (NG) (NC1211) and Airbus A320 (NC1217) family of commercial airlines. Leveraging a pedigree of more than 35 years of expertise in military fuel tank inerting, Cobham is now set to helping airlines achieve cost savings thanks to superior technology and design.
DAES Group is a dedicated global aerospace service group that provides integrated support by offering full service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales support.
Our worldwide network of consultants and partnerships allow us to support different fields such as material management (CFM), component repair, ground support, and capital equipment.
All our solutions improve performance, reduce costs, and enhance workplace safety and environment care. Among them:
Donecle provides a drone to automatically inspect aircraft during maintenance. Our technology combines a 100% automated drone (no pilot, no GPS) with image analysis algorithms to detect defects, lightning strikes, evaluate paint wear and check regulatory placards. We increase aircraft availability by reducing the length of inspections and provide data analysis solutions to optimize maintenance operations and costs while improving the safety of workers.
We offer a complete solution, from image collection to analysis and traceability, as well as training and maintenance.
F.E. Moran Special Hazard Systems is a heavy industrial fire protection contractor. Since 1979, F.E. Moran has provided turn-key protection and life safety solutions for industrial facilities located nationally and internationally. We have completed over 1,000 projects worldwide. Our in-depth knowledge of standards, design, and skilled installation crews offer the best fire protection service available. We have developed relationships with many of the largest General Contractors to complete new construction and captial projects. In addition, F.E.
FSB is a nationally recognized leader in the programming, planning and design of MRO facilities, hangars, support shops, flight simulators, and other aviation-related facilities. In recent years, FSB has designed in excess of 235 aircraft hangars valued at over $4 billion USD. FSB has been designing aviation facilities for 74 years and is a full-service architectural & engineering design firm that provides architectural design and production, and civil, structural, mechanical, plumbing, fire protection, electrical, and communications engineering design services.
GSP360 is a land-use program committed to the legacy of carefully considered, responsible, sustainable and environmentally sensitive growth and development. Focused on serving the needs of business partners, tenants and the community, GSP360 will support and fuel continued economic growth and development of the Upstate Region of South Carolina. This group of nine outstanding developable tracts of land has the potential to be developed in their entirety or subdivided into distinct parcels to suit individual tenant needs.
Haggard & Stocking is a privately held distributor of Aerospace MRO supplies, founded in 1972. Based in Indianapolis, we have facilities in fourteen states. Our core competencies include cutting tools, abrasives, tapes, adhesives and PPE. Proven experience in integrated supply, vendor managed inventory, vending & software solutions.
Jewers Doors is the world's leading designer and manufacturer of aircraft hangar doors with sliding, folding and specialist doors from our Esavian range suitable for very many projects. We have completed more than 1,000 projects around the world and our doors are installed on all six continents. Jewers Doors has built more main doors for Boeing 747 and Airbus A380 hangars than any other company. We provide a complete service ï¿½ including design, manufacture, opening preparation, installation with civil works, maintenance, servicing and repair.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.