This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
AeroClave, LLC, was founded in 2003 for the purpose of developing systems capable of decontaminating commercial and military aircraft from pandemic-producing viruses and other disease-causing pathogens.
The AeroClave system has evolved into multiple decontamination products that are easy to operate and actively limit the spread daily germs and dangerous pathogens. AeroClave's commercial clientele includes MROs, EMS and air ambulance operators, hospitals, law enforcement, and military clients.
Since 1968, ORAPI® has been understanding and anticipating the requirements of the aerospace industry, providing maintenance engineers with solutions to improve process cleaning efficiency and reduction of operating costs without compromising quality and standards.
ORAPI® offers a comprehensive range of consumables for cleaning and disinfection of exterior/interior aircraft surfaces, lavatory odor treatment, maintenance of engines and components. The range is backed by OEM approvals and is widely used by airlines and MRO operations.
Based in Newcomerstown, Ohio, SIMONA Boltaron is a leading thermoplastic sheet manufacturer for the aerospace and mass transit industries, among other markets. The company is the only plastic sheet manufacturer in the aerospace industry that can extrude, calendar and press laminate sheet in a single location. Its unmatched press laminating process can emboss an infinite range of textures into thermoplastic sheets.
Aero Marine Interior, Inc. (AMI) is approved by the EASA (145-6300) and FAA (XLJR867Y) as a repair station. We specialize in providing quality aircraft repair services for commercial and corporate aircrafts, with comprehensive interior refurbishing, upholstery, carpeting, and cabinetry. Our service technicians manage the removal and installation of aircraft seats and interior components, in addition to AOG services.
The smart collaboration at work in aerospace chemicals. Founded in 2003, Aerochemicals is a global alliance of independent specialists in industrial chemicals for the aerospace sector. We offer a wide range of qualified products that meet the needs of leading companies in the international aviation market. The alliance creates a global business network allowing each member to position themselves as global leading suppliers for OEMs, MROs and airlines while achieving their individual goals.
Associated Industries, Inc. is a premier stocking distributor to the aerospace and industrial markets. Associated Industries specializes in composite materials, sealants, adhesives, surface technologies, and many more specialized materials going into aerospace and MRO markets. Associated Industries represents the most recognizable brands in the industry, including Solvay, Henkel, Airex/Baltek, Hexcel, PRC De-Soto, and Sandstrom, plus many more quality brands. Associated Industries is AS9120 and ISO 9001 certified and is centrally located in Wichita, Kansas.
Our detergent technology cleans better … yet it’s safer. Manufacturer of OEM-approved MRO cleaning products for the aerospace/aviation industry since 1935, Brulin’s MRO offerings include legendary AquaVantage 815 GD and the new technology of AquaVantage 3887 GD – another milder, safer, more effective cleaning product for turbine, wheel & brake and airframe MRO. Reduce costs with longer tank life, simpler maintenance and better cleaning. Broad material compatibility testing and approvals. People-friendly formulation, mild pH, no VOCs.
Certified Aviation Services (CAS) is a leading provider of MRO services for fleet operators, leasing companies, OEMs, and Adjusters globally. Backed by more than 300 world-class A&P mechanics, and 25+ years of service, CAS is one of the most experienced MRO service providers. Throughout our nationwide network, CAS conducts line maintenance, modifications, installations, component overhaul, and engine services, as well as heavy recovery and repairs. Each division is committed to providing our customers innovative, cost-effective solutions when and where they need it.
For more than 35 years, Chappell Supply & Equipment Co. in Oklahoma City has served as one of the nation’s largest industrial cleaning equipment suppliers. Looking forward, Chappell continues to meet the standards of the ever-changing, complex requirements of the industrial cleaning marketplace. We provide biological wash water treatment, waste water recycle systems, pressure washers, parts washers, steam cleaners, poly tanks, and more. We can reduce your maintenance costs without risking safety. All of our equipment is the most technologically advanced offered today.
Cleaning Systems, Inc. is a leading manufacturer of cleaning and protection chemical products, as well as chemical application technology, for the transportation industry globally. Founded in 1976, Cleaning Systems, Inc. is based in De Pere, Wisconsin, and is an ISO 9001:2015 and ISO 14001:2015 registered company, whose products are known for high quality, value, effectiveness, environmental sustainability, as well as cutting edge, industry leading technology.
ClorDiSys Solutions, Inc is a global leader in contamination control. ClorDiSys offers a variety of solutions to provide the best fit for any type of application. ClorDiSys provides high level disinfection and sterilization equipment and auxiliary products. Our chlorine dioxide gas is EPA registered as a sterilant capable of eliminating all viruses, bacteria, molds and spores, while our ultraviolet light technology provides high-level disinfection of visible surfaces in a matter of minutes.
DAES Group is a dedicated global aerospace service group that provides integrated support by offering full service from the consulting and technical accessory to the equipment selection, acquisition, installation, training, and after-sales support.
Our worldwide network of consultants and partnerships allow us to support different fields such as material management (CFM), component repair, ground support, and capital equipment.
All our solutions improve performance, reduce costs, and enhance workplace safety and environment care. Among them:
Be ready for any manufacturing or maintenance need with Henkel’s global portfolio of surface treatment and structural adhesive solutions to meet small and large-scale MRO needs for the aviation industry. From pen-size applicators for touch-ups to composite and structural adhesive kits, small repairs are easy and efficient with ready-to-use packaged products. Additionally, conversion coatings, jet engine cleaners, metal deoxidizers, etchants and REACH environmentally-advantaged paint strippers are available for larger MRO processes.
INCERTEC is among the largest NADCAP Accredited plating and metal finishing companies in America. We have approvals from many of the world's biggest names in the fields of aerospace, medical devices, and electronics. Customers from these industries trust INCERTEC with their most demanding and important plating needs. Although gold plating, electroless nickel plating, copper plating, anodizing, and fluorescent liquid penetrant (NDT) inspection are a few of our core specialties, we have the capabilities and internal expertise to tackle virtually any project.
Manufacturing No Metal on Metal Contact Material Handling Equipment:
• Vane and Blade Baskets
• Circular Floats to Carry Engines and Components -Patented -No Metal on Metal Contact
• Shafi Carts w/Delrlin Saddles so Safe Ride for high value landing gear & shafts-Patented
• Heat Treat Racks
• Carts to hold Vane and Blade Baskets
• Dipping Baskets
• Storage Baskets
• Expanded Metal Baskets
• Marlin Steel RFID Tracking -high value parts
100% USA Made
20% of Employees Degreed Engineers ISO 9001: 2015
Mundo-Tech, Inc., is a manufacturer of new fabricated tube assemblies for aerospace and defense markets. We are a highly valued source for technically challenging tube assemblies in all alloys, including titanium, inconel, aluminum, and stainless. Services include CNC tube bending, tube fabrication, reverse engineering, tie rods, swaging, end forming, welding, and oxygen cleaning. Fabrication includes lavatory tubes and ducts, engine tubes, drain tubes, oxygen tubes, pnuematic tubes, and hydraulic tubes.
Peening Technologies provides Shot Peening, Glass Bead Peening, Rotor/Flapper Peening, Nondestructive testing, Vibratory Finishing and many other services to the aerospace, and power generation industries.
Peening Technologies Equipment offers affordable CNC robotic shot peening equipment built by our experts to meet your shot peening needs. In addition to building machines, we offer process development, tooling design & development, machine programming, process qualification & documentation.
Performance Plastics is a precision injection molder specializing in geometrically complex components utilizing chemically inert materials. Our expertise in complex components led us to create the patented EnduroSharp® line of Torlon® aircraft maintenance tools. The EnduroSharp® product line consists of nonmetallic tools used to remove adhesives, sealants, and coatings from aircraft structures.
PPG’s aerospace business is a leading supplier of aircraft transparencies, PRC and Pro-Seal aerospace sealants, DeSoto, Deft, and Cuming Microwave aerospace coatings and technologies, aircraft maintenance products, and Semco packaging & application systems for commercial, regional, military and general aviation. PPG also offers chemical management services and operates a global network of Application Support Center.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.