This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
4D Technology designs and manufactures surface gauges, surface roughness profilers and other equipment to accurately measure precision surfaces. 4D products use patented, state-of-the-art technology to bring high resolution measurement to production environments, even in the presence of severe vibration and noise.
Induction Innovations®, Inc. is a family-owned and operated manufacturer of high-performance induction heaters for over 20 years. Our headquarters and all manufacturing is located in Elgin, Illinois, just west of Chicago.
Our induction heating tools are designed to solve problems for repair technicians such as removing stuck or corroded parts and adhesives in a faster, safer and more precise way than using an open flame torch.
USA Borescopes is a global supplier of world class visual inspection equipment. We are the one stop source for aviation and aerospace professionals. In addition, we perform borescope repairs on any make or model borescope with FREE repair estimates. All work is guaranteed to meet OEM standards.
8tree makes portable 3D surface inspection tools that deliver dent-mapping, blend-out, fastener-flushness and panel-alignment results within seconds. 8tree’s dentCHECK tool is approved by Airbus, backed by Boeing & Bombardier, and the choice of the world’s leading airlines/MROs for Line/Base maintenance and AOG tasks. It slashes damage-mapping & reporting times by 90%, delivers unmatched measurement accuracy and SRM-compliant ‘go/no-go’ answers.
A.I.R.S. (Aviation Instruments Repair Specialists), is an EASA (EASA. 145.5033), FAA (VTBR433V), ANAC (1108-42/ANAC) DGCA, DAAO certificated repair station based in Miami, Florida, serving the aviation community for 28 years. It has capabilities in Instruments (Class 2 Electrical, Class 3 Gyroscopic, Class 4 Electronic); Accessories (Class 3 Electronic Accessories); and Radios (Class 1 Communications Equipment, Class 2 Navigational Equipment, Class 3 Radar Equipment). A.I.R.S.
AeroTools Connection provides quality commercial aircraft maintenance tooling and GSE worldwide. We stock a large inventory of tools, electrical equipment, components and test equipment for all types for commercial aircraft.
AGSE is the global leader in the original design and manufacture of innovative aerospace ground support equipment and aircraft tooling. Headquartered in Los Angeles, California, USA, our staff of experienced professionals deliver the most robust offering of OEM-approved AOG, GSE, and Tooling Products in the aviation industry. Westmont Industries, AGSE's parent company, is dedicated to the design, manufacture, and installation of high-quality, specialty industrial equipment, which includes Engine Gantries, Vertical Build & Access Stands, Crane Systems, and Turnkey Projects.
AirMark industrial stenciling systems are the preferred livery, marking, and labeling solutions for the aircraft industry. We invented the digital process for producing aircraft paint stencils that meet the highest industry performance standards for reliability, crisp edges, and clean removal.
Additionally, AirMark marking systems are used throughout the manufacturing ecosystem for safety signage, pipe markers, general wayfinding, organizational signs (5S + Safety), identification, shadow boxes, emergency signs, and more.
Package development for aircraft components. Bill Thomas Associates Inc. (BTA) provides reusable packaging solutions for the aerospace sector, working exclusively with airlines, MROs and aerospace OEMs for over 35 years. This multi-decade partnership has resulted in customized, off-the-shelf solutions for protecting aircraft wheels, brakes, oxygen cylinders, main batteries, avionics — for thousands of individual P/Ns.
BriskHeat Corporation Developer and manufacturer of the ACR-3 Series Hot Bonders, Vacuum Tables, and Flexible Curing Blankets. Since 1949 BriskHeat has provided the most durable and user-friendly products in the world with technical engineering support available to assist with all your curing, mold, and tooling needs. Whether your application is simple or complex, BriskHeat’s experience and dedication to develop a solution that meets all your specification requirements is second to none. Call or email a BriskHeat’s representative today to get your project started.
Carolina GSE is a global supplier, distributor, repair facility, and service center of aircraft ground support equipment (GSE). We offer complete GSE solutions for new hangar start-ups, MROs, FBOs, military, and commercial airlines. Our expansive GSE portfolio includes a wide range of manufacturers including Tronair, Eagle Tugs, JetPorter Tugs, Malabar, DAE, Columbus Jacks, Unitron, Start Pac, Tiger Tugs, Dekal Load Banks, Jackson Weight Scales, Aero-Weigh Weight Scales, and much more.
CEMB is a worldwide leading manufacturer of universal horizontal, vertical, and special balancing machines for the aerospace, automotive, and general manufacturing industries since 1946. We supply a complete range of balancing machines for rotors from 10 grs to 100 tons.
Clayton is a design and manufacturing firm focused on dust collection solutions for commercial and military aerospace fabricators and maintainers. We work with leading aerospace firms to provide engineering controls which enhance worker safety and ensure compliance with OSHA and environmental regulations.
Daniels Manufacturing Corporation (DMC) is the recognized leading manufacturer of application tooling for the aircraft, aerospace, and high reliability electronics industries, with experience that spans eight decades. Our products have been used on virtually every defense system, aircraft program, land- or sea-going transport system, space exploration program, and many other types of manufacturing and support activities.
DELTA H is a U.S. Air Force veteran- and family-owned and operated manufacturer of industrial heat treating furnaces and composite curing ovens designed exclusively for the aerospace and defense industries.
DELTA H provides confidence to your team's in-house heat treat operations by supplying turn-key systems that meet and exceed the strictest standards of AMS2750E and Nadcap accreditation requirements — along with a full week of start-up and training services.
EDMO Distributors, Inc is on the cusp of celebrating its 50th anniversary. Serving commercial, corporate, military, and general aviation customers in the fixed-wing and rotor markets, EDMO has secured a reputation as one of the most reliable sources for aircraft electronics, test equipment, installation supplies, wire and cable, tooling, and pilot supplies. EDMO’s commitment to providing the best service and largest selection possible has made it a company that customers count on and trust. EDMO does whatever it takes to deliver quality and excellence to its brands and customers.
For over 50 years, Enerpac's Sweeney division has been a leader in manufacturing commercial and military aircraft maintenance tooling. By offering complete in-house design and production capabilities for every customer's needs, Sweeney provides solutions for any torque requirement. Sweeney's engineering standards ensure the tools never fail when used as intended. From supporting existing tooling needs on legacy to designing custom maintenance fixtures on modern turbine engines, Sweeney is the brand you can trust.
Fatigue Technology (FTI) pioneered Cold Expansion Technology almost 50 years ago and has advanced this science with innovative solutions for bushing and fastener installations. FTI provides products that repair structural damage, return damaged fastener holes to nominal size, and partner with MROs for innovative repair solutions. FTI actively engages with Original Equipment Manufacturers to ensure tooling readiness for Service Bulletin maintenance.
First Class Air Support is a world-wide 24/7 distributor of aftermarket aircraft components, providing superior quality and service right out of the gate. We ensure that your needs are met every step of the way, from nose to tail, take-off to landing. Our vast inventory of over 100,000 line items includes aftermarket aircraft parts (new, serviceable or overhauled), rotable and expendable parts and avionics for numerous types of aircraft.
Haggard & Stocking is a full line distributor focusing on aerospace, automotive, foundry, heavy transportation (rail), petroleum, metal fabrication and medical markets throughout the U.S. and abroad. Established in 1972, Haggard & Stocking is one of the Midwest's largest aerospace and industrial distributors with programs that range from general distribution, vendor managed inventory solutions, vending programs, on-site inventory solutions, and B2B systems integration.
for information about which cookies we use and what information we collect on our site. By continuing to use this site, you agree that we may store and access cookies on your device.