MRO Links is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Category: 

Pave Technology Co., Inc.

2751 Thunderhawk Ct.
Dayton, OH 45414
United States

Hermetic Electrical and Fiber Optic Bulkhead Connectors And Wire Seals

HERMETIC THRU-BULKHEAD CONTINUOUS STRANDED CONDUCTOR ELECTRICAL WIRE SEALS

While default leak tests of 80 psi (5.5 bar) of no air/nitrogen bubbles visible or a high vacuum helium leak test are shown on most PAVE hermetic seal drawings, significantly higher pressure tests are usually available upon request for most designs to several hundred or more psi(bar) pressures. Certain designs can be tested as high as 10,000 psi (650 bar) or more!

Regardless of the pressure differential amount whether low or high pressures, there will be NO detectable leakage of gases or fluids in any PAVE products, including those seals with stranded copper conductor wires and or shields that feed through the bulkhead using any type of wire insulation or wire lengths.

PAVE hermetic seals are any type of insulated, stranded or solid plated copper conductors in any combination or lengths, copper or brass connector pin contacts or glass fiber optic cables of any type, all sealed for low or high pressures or vacuums, helium gas tight, moisture tight bulkhead seals available in unlimited wide range of combinations that can be easily customized for cost effective small or large quantities. Wire connector terminations can also be included for a complete, ready to use hermetically sealed thru-bulkhead wire connector harness