The T680 contains five wide-range time stampers. Each channel can snapshot the time of the rising edge of one electrical input, to 12.2 picosecond resolution with 48 bit range. In time-stamp mode,...
P940 Modular Power System
Need a moment?
Save this service to your Saved Items and return to it later.
The P940 is a modular power instrument intended primarily for aerospace testing. It consists of a 3U rackmount enclosure with main controller, power supply and cooling, and provision for installation of up to eight power, load, switching, or measurement modules.
Features include:
- 1000 watt universal-input 48-volt power supply that is distributed to all modules
- Uniform, rational SCPI command set with Ethernet and USB interfaces
- The P940 can also be controlled manually via front panel color LCD and controls
- All modules include full measurement capability; each module’s measurable values (such as output voltage, current, and frequency) can be read remotely via Ethernet/USB
- Atomic strobe allows a group of settings to be installed simultaneously across modules or multiple chassis
- Four BNC connectors are provided to monitor any voltage or current waveforms
- Voltage and current waveform acquisition across modules and chassis
- UDP realtime data logging
Module functions include:
- Up to 64 channels of DC power supplies, with programmable voltage and current limits
- Up to 64 channels of programmable AC/DC loads, constant current/voltage/resistance
- AC/DC power analysis
- Permanent-magnet alternator simulators
- Relay and LF/RF signal switching modules
- Up to 192 channels of cable fault insertion and measurement
- High voltage power supplies
- Stepper motor, torque motor, solenoid, and hydraulic servo drive
- Cryogenic temperature and helium level measurement
- Additional specialized or custom/combo boards, based on Highland's existing suite of aero-space signal processing functions
View this product at highlandtechnology.com/product/p940
You may also like
-
Featured
-
The Highland P900 is a rack-mount precision three-phase AC power source and permanent-magnet-alternator simulator. Its programmable frequency, voltage, and source impedance allow it to power...
FeaturedHighland Technology, Inc.
-
The V344 32 MHz VME provides 8 channels of independently programmable sine, sawtooth, triangle, and square/PWM/pulse, Gaussian noise, and arbitrary waveform generation. Channel/board sync...
FeaturedHighland Technology, Inc.
-
The P500 is a benchtop instrument that generates four separately programmable precision delay-and-width output pulses from a start trigger. It can generate delays up to 1000 seconds in 1 picosecond...
FeaturedHighland Technology, Inc.
-
The V545 is a generalized- DSP-based sinewave processor intended for simulation and acquisition of LVDTs, RVDTs, synchros, and resolvers. 24 generalized, isolated channels are provided. Each...
FeaturedHighland Technology, Inc.