Handheld Industrial Borescope. Cable length of 1 meter and small diameter of 3.9 mm/0.16 in. LEDs on the inspection camera illuminate the cavities. The inspection camera can be used to save images...
Belt Tension Meter PCE-BTM 2000L
Need a moment?
Save this service to your Saved Items and return to it later.
The belt tension meter is an optically measuring maintenance tool for determining the belt tension force. This belt tension meter consists of a display device and a sensor head attached on a semi-flexible gooseneck. The advantage of the gooseneck is that the sensor head can be flexibly positioned. Due to the mobility of the gooseneck, the sensor can measure the strand force even in hard to reach places. The belt tension measuring device measures the belt tension (in Newton) and the belt frequency (in Hz) of the belt in the stationary state.
A small impulse on the belt is sufficient to set the belt vibrating. The belt tension meter measures with the sensor the natural frequency of the belt generated in this way and visualizes it on the display. The belt tension meter can directly determine the actual tension (in Newton / Pound Force) of the belt from the belt frequency combined with the optionally entered belt length and belt mass. However, entering this data is not necessarily required in order to carry out the measurements directly with the belt tension measuring device. The measurement units in the device can be switched between N (SI unit) and pound force (US unit).
The reading is always shown as the belt frequency in Hz on the display of the belt tension measuring device. The intuitive graphic menu is visualized on the high-contrast display of the belt tension measuring device in six different languages. Up to 750 data records can be stored in the memory of the belt tension measuring device. The belt tension measuring device is delivered completely ready for use. The scope of delivery includes the handheld device, the standard sensor with gooseneck, a magnetic holder, batteries and operating manual. To increase the flexibility during the measurement, the following items are optionally available to the belt tension meter: an external sensor head with a spiral cable, a device hard case, a frequency mallet and a tripod.
View this product at www.pce-instruments.com/us/measuring-instruments/test-meters/belt-tension-meter-pce-instruments-belt-tension-meter-pce-btm-2000l-det_6113588.htm
You may also like
-
Featured
-
Handheld Industrial Borescope. Cable length of 10 meter and diameter of 5.5 mm/0.22 in. The waterproof camera head features 4 LED lights with automatic illumination and digital image magnification...
FeaturedPCE Instruments
-
The closing force measuring device is a wireless, electronic measuring device for externally powered doors and gates. Typical use is the final inspection of new systems as well as regular...
FeaturedPCE Instruments
-
The UCI hardness tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. The UCI hardness tester works on the basis of the Ultrasonic Contact...
FeaturedPCE Instruments
-
Handheld Industrial Borescope. Cable length of 3 meter and diameter of 5.5 mm/0.22 in. The waterproof camera head features 6 LED lights with adjustable intensity for optimal illumination and...
FeaturedPCE Instruments