The hanging scales are available with a measuring range of 0 ... 300 kg / 0 ... 661 lbs. With an accuracy of 1% of the measuring range, the dynamometer is a particularly precise measuring device....

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.
Aviation Week Marketplace is part of the Informa Markets Division of Informa PLC
Save this service to your Saved Items and return to it later.
The surface pH meter PCE-228SF is used to measure the pH on surfaces such as paper, cardboard, leather, textiles and skin. The pH and temperature can be stored directly on the SD card. The special pH electrode of the pH meter PCE-228SF is particularly flat and made of epoxy, which makes the pH electrode particularly resistant to impact. Temperature compensation is either manual or automatic via the supplied temperature sensor.
In addition to the measurement of the pH value of surfaces, the pH meter can also be used to measure very small sample volumes from 0.1 ml upwards. For this, the surface pH meter is supplied with a special measuring cuvette. This cuvette can be plugged directly onto the electrode of the pH meter.
View this product at www.pce-instruments.com/us/measuring-instruments/test-meters/ph-meter-ph-tester-pce-instruments-surface-ph-meter-pce-228sf-det_5860028.htm
The hanging scales are available with a measuring range of 0 ... 300 kg / 0 ... 661 lbs. With an accuracy of 1% of the measuring range, the dynamometer is a particularly precise measuring device....
The benchtop scale is a high-precision benchtop scale with a measuring range of up to 220 g. The benchtop scale has a resolution of 0.1 mg. Due to this low resolution, even the smallest air...
The UCI hardness tester PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. The UCI hardness tester works on the basis of the Ultrasonic Contact...
PCE-CT 65 is a coating thickness gauge that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal...
Handheld Industrial Borescope. Cable length of 1 meter and small diameter of 3.9 mm/0.16 in. LEDs on the inspection camera illuminate the cavities. The inspection camera can be used to save images...